Turnmill - LR30TM L7
| Description | Unit | LR30TM L7 |
|---|---|---|
| Capacity | ||
| Swing over carriage | mm | 670 |
| Chuck Size | mm | 304 |
| Max. Turning Diameter | mm | 394 |
| Max.Turning Length | mm | 392 |
| Main Spindle | ||
| Spindle nose | type | A2-8 |
| Hole through Spindle | Mm | 56 |
| Spindle Speed | rpm | 2500 |
| Spindle Motor Power | Kw | 15 / 18.5 |
| FEED | ||
| Travel X - Axis | mm | 275 |
| Travel Z - Axis | mm | 465 |
| Rapid traverse (X/Z) - Axes | m/min | 20 / 20 |
| TURRET | ||
| No. of Stations | Nos | 12 |
| Tool Shank Size | mm | 25 x 25 |
| Maximum Boring Bar Diameter | mm | 40 |
| Turret Indexing | Type | Hydraulic |
| Turret Indexing Time | Sec | 1 to 1.5 |
| CNC SYSTEM | ||
| Controller | Type | Fanuc |
| Machine Size | ||
| L x B x H | mm | 1830 x 2870 x 2820 |
| Weight | kg | 6600 |
Turnmill - LR40TM L15
| Desciption | Unit | LR40TM L15 |
|---|---|---|
| Capacity | ||
| Swing over Bed | mm | 880 |
| Chuck dia.Max | mm | 530 |
| Max. Turning Diameter | mm | 700 |
| Max.Turning Length | mm | 650 |
| SPINDLE | ||
| Spindle nose | type | A2-11 |
| Hole through spindle | mm | 100 |
| Spindle Spped | rpm | 1800 |
| Spindle motor power | kW | 18.5 / 22 |
| Feed | ||
| Travel X - Axis | mm | 428 |
| Travel Z - Axis | mm | 700 |
| Rapid traverse (X/Z) - Axes | m/min | 20 / 12 |
| TURNMILL CENTER | ||
| No. of stations | nos | 12 |
| Tool shank size | mm | 32 x 32 |
| Maximum Boring Bar Diameter. | mm | 60 |
| Turret indexing | Type | Hydraulic |
| Turret Indexing Time | Sec | 1 to 1.5 |
| CNC System | ||
| Controller | Type | Fanuc |
| Machine Size | ||
| L x B x H | mm | 2342 x 2600 x 4555 |
| Weight | kgs | 12000 |
info@lmwcnc.com